GE EPM 5300, EPM 5200, EPM 5350 instruction manual Step Press Amps to begin Data Entry Sequence

CHAPTER 10: PROGRAMMING GROUP 1

MAX	AC VOLTS	MAX	AC VOLTS
	A B C A B C		A B C A B C
MIN	N N N B C A	MIN	N N N B C A
LM1		LM1
LM2	AC AMPS	LM2	AC AMPS
	A B C N		A B C N
	POWER		POWER

			PF				PF
			KW				KW
			KVA				KVA
KVAH	KWH	FREQ	KVAR	KVAH	KWH	FREQ	KVAR

MAX/MIN	VOLTS	AMPS	POWER	PHASE	MAX/MIN	VOLTS	AMPS	POWER	PHASE
LIMITS				NEXT	LIMITS				NEXT

ENTERING THE SCALE FACTOR:	DECIMAL POINT SELECTION:
Step 3:	Step 4:
a. Press AMPS to begin Data Entry Sequence.	a. Press VOLTS to move decimal point.

!Lower display is replaced with a single dash.

b. Press AMPS to store.

b. Press VOLTS to move the segment UP or DOWN to set Scale Factor.

!UP signifies - Kiloamps.

!DOWN signifies - Amps.

c. Press AMPS to store.

MAX	AC VOLTS	MAX	AC VOLTS
	A B C A B C		A B C A B C
MIN	N N N B C A	MIN	N N N B C A
LM1		LM1
LM2	AC AMPS	LM2	AC AMPS
	A B C N		A B C N
	POWER		POWER

			PF				PF
			KW				KW
			KVA				KVA
KVAH	KWH	FREQ	KVAR	KVAH	KWH	FREQ	KVAR

MAX/MIN	VOLTS	AMPS	POWER	PHASE	MAX/MIN	VOLTS	AMPS	POWER	PHASE
LIMITS				NEXT	LIMITS				NEXT

Step 5:

! The Full Scale for current is indicated in middle ! Repeat this procedure until the value is entered. display.

! Lower display indicates new Full Scale Setting.

!Four dashes appear in lower display.

! Enter the four digit full scale.	! Middle display indicates Scale Factor.
	Group and Function Number appear (including a
Press VOLTS until the number appears.	decimal point) in upper display.

b. Press AMPS to store.

10.3: Group 1, Function 2—Scale Selection and Decimal Placement for Watts

Programming GROUP 1 also provides decimal positioning for maximum resolution. The following examples assist in selecting the best decimal position for FUNCTION 2.

NOTE: Shift the decimal left to increase resolution. Wattage should not exceed a numeral value of 2500. Shift the decimal one position right to decrease resolution.

GE Multilin EPM 5000 series Advanced Power Meters 63