GE EPM 5300, EPM 5200, EPM 5350 instruction manual Time Delays & Relay Mode

CHAPTER 12: GROUPS 4, 5 AND 6—SET LIMITS AND RELAYS TIME DELAYS & RELAY MODE

12.2 Time Delays & Relay Mode

Time Delay indicates whether a delay exists in the relay changing position. Relay Mode indicates whether the relay will act as a protective switch or not.

The Time Delay and Relay Mode are both located in GROUP 0, FUNCTIONS 4 & 5.

The following groups allow the user to program limits and relays

Group 4: Volts/amps Set Limits / Relays

GROUP 4 contains LM1 and LM2 set limit values for voltage and amperage scales. This allows the user to program limits for the four following functions:

1.Volts phase-to-neutral

2.Volts phase-to-phase

3.Amps A, B, C

4.Amps neutral

EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL 12–91