GE EPM 5200 Press Amps once to Disable the Limit, Limits or Relays Programming Procedure

CHAPTER 12: GROUPS 4, 5 AND 6—SET LIMITS AND RELAYS LIMITS OR RELAYS PROGRAMMING PROCEDURE

MAX

MIN

LM1 LM2

AC VOLTS

A B C A B C

N N N B C A

AC AMPS

A B C N

			POWER
			PF
			KW
			KVA
KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER	PHASE
LIMITS			NEXT

Step 3:

a. Press AMPS once.

Lower display is replaced with three dashes.

Follow this step for DISABLING LIMITS:

MAX			AC VOLTS
			A	B C A B C
MIN
			N N N B C A
LM1
LM2			AC AMPS
				A B C N
				POWER
				PF
				KW
				KVA
KVAH	KWH		FREQ	KVAR
MAX/MIN	VOLTS	AMPS	POWER	PHASE
LIMITS				NEXT

Step 4:

a. Press AMPS once to Disable the Limit.

The display blanks momentarily, then the disabled settings appears in middle and lower displays.

The Set Above/Below will be set to below.

Trip Relay 1 will be disabled.

Trip Relay 2 will be disabled.

The Setup Level will be set to 0000.

MAX			AC VOLTS
			A	B C A B C
MIN
			N N N B C A
LM1
LM2			AC AMPS
				A B C N
				POWER
				PF
				KW
				KVA
KVAH	KWH		FREQ	KVAR
MAX/MIN	VOLTS	AMPS	POWER	PHASE
LIMITS				NEXT

Step 5:

a. Press VOLTS to change current Set Above/Below, Trip Relay 1, and Trip Relay 2 settings.

This toggles the segments UP (above limit) or DOWN (below limit).

b. Press AMPS to store.

c. Press VOLTS to toggle the second segment UP (enable Relay 1) or DOWN (disable Relay 1).

d. Press AMPS to store.

e. Press MAX/MIN/LIMITS to proceed to entering the limit value.

f. Press AMPS to store.

EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL 12–99