GE EPM 5350, EPM 5200, EPM 5300 Group 1, Function, Voltage Full Scale, Group 1 Programming Format

GROUP 1, FUNCTION 0 CHAPTER 10: PROGRAMMING GROUP 1 – VOLTAGE, AMP AND WATT SCALE SETTINGS

10.1Group 1, Function 0

-FULL SCALE VOLTAGE SETTINGS, SCALE & DECIMAL POINT PLACEMENT -

Table 10–1: Group 1 Programming Format

Group and Function Number	Function
10.	Full Scale Selection for Volts
11.	Full Scale Selection for Amps
12.	Full Scale Selection for Watts
1E.	Exit Programming GROUP 1

Tables 10-2and 10-3contain Full Scale Settings for typical voltages and currents (PT and CT arrangements).

Table 10–2: TYPICAL Full Scale Settings for Volts

Secondary PT Values	PT Ratio	Full Scale
75 V (Suffix 75) L-N MAX	120:1	9.00 KV
120/208 V	1:1 (Direct)	120.0
120/208 V	4:1	0480 V
120/208 V	120:1	014.4 KV
277/480 V (Suffix G)	1:1 (Direct)	0300 V
120/208V	600:1	072.0 KV
120/208	1150:1	138.0 KV

If PT is connected line to line, the full scale can be 14.40 KV. Full scale is 300 V L-N, not 277, because the factory calibration is 300 V. Be sure the table is based on a meter regulation of 2000 A/D counts. Thus, for best accuracy, all settings should be placed within that range.

10.1.1 Voltage Full Scale:

To change the Full Scale Settings:

Press MAX/MIN/LIMITS at any time to cancel before storing the last digit or switch.

10–74 EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL