GE EPM 5300 Group 0, Function 6-KYZ Parameter Selection, To perform the KYZ Parameter Selection

CHAPTER 9: PROGRAMMING GROUP 0 - GLOBAL METER SETUP GROUP 0, FUNCTION 6—KYZ PARAMETER SELECTION

9.8Group 0, Function 6—KYZ Parameter Selection

FUNCTION 6 applies only if Option -NL or -NL2 was ordered.

OPTION -NL: This option gives the meter 2 Relays and one KYZ pulse. The KYZ pulse can be programmed to the below features.

Select a single parameter from Table 9-5according to the EPM 5300P model being programmed.

OPTION -NL2: This option offers 3 distinct KYZ pulses instead of Relays.

Only three separate parameters may be selected: FUNCTION 6.0 (KYZ Port 0), FUNCTION

6.1(KYZ Port 1), and FUNCTION 6.2 (KYZ Port 2). The available parameters vary according to the EPM 5300P model being programmed. For exact port positions see Installation Sections.

	Table 9–1: KYZ Parameters
Parameter	Description
0	Disable KYZ
1	Positive Watt Hour KYZ
2	VA Hour KYZ
3	Negative Watt Hour KYZ
4	Positive VAR Hour KYZ
5	Negative VAR Hour KYZ

APPLICABLE SELECTIONS: 5300P - +WH, -WH, VAH 5300P - +WH, -WH, +VARH, -VARH

To perform the KYZ Parameter Selection:

Press MAX/MIN/LIMITS at any time to cancel before storing the last digit or switch.

EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL 9–67