GE EPM 5200 Group 6 LM1/LM2 Set Limits, Group 6 Programming Format For THD Limit Conditions

GROUP 6: LM1/LM2 SET LIMITS: CHAPTER 12: GROUPS 4, 5 AND 6—SET LIMITS AND RELAYS

12.6 Group 6: LM1/LM2 Set Limits:

U S E V O L T S T O T O G G L E B E T W E E N L M 1 A N D L M 2 .

T H E L IM IT V A L U E .

M A X		A C V O L T S
		A	B	C	A	B	C
M IN
L M 1		N	N	N	B	C	A
L M 2		A C A M P S
T H D
			A	B	C	N
				P O W E R
					P F
					K W
					K V A
K V A H	K W H	F R E Q			K V A R
M A X /M IN	V O L T S A M P S	P O W E R		P H A S E
L IM I T S				N E X T

F R O M L E F T T O R IG H T : S E T L IM IT A B O V E /B E L O W , T R IP R E L A Y 1 A N D T R IP R E L A Y 2 .

12.6.1Group 6: THD Set - Limits / Relays (For Option -h)

GROUP 6 contains LM1 and LM2 set limits for THD. These allows the user to program limits for the following functions: THD Volts AN, BN, CN, Amps A, Amps B, and Amps C.

Table 12–7: Group 6 Programming Format For THD Limit Conditions

Group and Function Number	Function
60.	THD Volts AN
61.	THD Volts BN
62.	THD Volts CN
63.	THD Amps A
64.	THD Amps B
65.	THD Amps C
6E.	Exit Programming GROUP 6

Table 12–8: Group 6 Functions 0–5

LM1	LM2	SWITCH 1	SWITCH 2	SWITCH 3	VALUE
LED	LED	ABOVE/BELOW	RELAY 1	RELAY 2
ON	OFF	Digit Up-trigger above level	Digit Up-enabled	Digit Up-enabled	0-999.9
		Digit Down-trigger below level	Digit Down-disabled	Digit Down-disabled	0-999.9
off	on	Digit Up-trigger above level	Digit Up-enabled	Digit Up-enabled	0-999.9
		Digit Down-trigger below level	Digit Down-disabled	Digit Down-disabled	0-999.9

12–96 EPM 5300 SERIES ADVANCED POWER METERS – INSTRUCTION MANUAL