Getting Started

Ribbons used in the Zebra XiII printer MUST be as wide as or wider than the media used. Zebra-brand ribbons provide an extremely smooth backing surface which protects the printhead from abrasion by the media. If the ribbon is narrower than the media, areas of the printhead will be unprotected and will be subject to premature wear.

Since print quality is affected by media and ribbon, printing speeds, and printer operating modes, it is very important to run tests for your applica- tions. This is especially true if you’re operating in Peel-Off mode, where these variables combine with label size, backing content, die-cut depth, and even humidity to affect printer operation.

Unpacking

Save the carton and all packing materials in case shipping is ever required. Inspect the printer for possible damage incurred during shipment.

•Check all exterior surfaces.

•Raise the media access door and inspect the media compartment.

Reporting Damage

If you discover shipping damage upon inspection:

•Immediately notify the shipping company of the damage.

•Retain all packaging material for shipping company inspection.

•File a damage report with the shipping company and notify your local distributor and Zebra Technologies Corporation of the damage.

Zebra Technologies Corporation is not responsible for any damage incurred during shipment of the equipment and will not repair this damage under warranty. Immediate notification of damage to the shipping company or its insuring agency will generally result in ensuring any damage claim validity and ultimate monetary compensation.

4

Zebra XiII Printer User’s Guide