Options

Zebra On-Line Verifier

The Zebra On-Line Verifier is an external device that provides the means to automatically scan and analyze certain bar code symbols as they are printed. If the verifier detects a problem with the bar code, it will automatically pause the printer. The operator must then correct the problem and take the printer out of pause mode before printing will resume.

Several operational modes are available, ranging from simple freescan to one where specific symbology and data is required.

Applicator Interface

The Applicator Interface is an ideal method of integrating XiII printers into custom applications. This interface allows printer control from a personal computer or Programmable Logic Controller (PLC) via one cable attached to a connector located at the rear of the printer. This provides the capability of placing the XiII printers on a production line in a loose loop, print and apply configuration, or other applications where the printer must be controlled by a machine.

Media Supply Spindle

The optional Media Supply Spindle replaces the standard hanger. This is useful for applications that require the printer to be mounted in a non-horizontal position where the standard media hanger prohibits consistent media flow.

Zebra XiII Printer User’s Guide

77