Options

Cutter

Your Zebra XiII printer may be equipped with a cutter used to cut the labels after they are printed. The Cutter Option may be installed concurrently with other options including the Rewind Option. The Cutter Option may be factory -installed or it may be installed in the field by a qualified service techni- cian.

The Cutter Option must be enabled by entering the Programming Mode and using the front panel display to select the Cutter Print Mode. See Chapter 2, “Operation,” for additional informat ion. The Cutter Catch Tray may be installed to collect labels, tickets, or tags after being cut.

Internal Fanfold Media Supply Bin

Your Zebra XiII-Series printer may be equipped with an optional internal Fanfold Media Supply Bin. It is used to load fanfold media within the XiII printer’s media compartment, and protects the media from e nvironmental contaminants such as dust and dirt. The Fanfold Media Supply Bin may be installed in the field by the operator.

Note: The Fanfold Media Supply Bin may not be installed in XiII printers with the Rewind Option. Fanfold media may be used on printers with the Rewind Option installed by using one of the external fanfold supply access slots at the bottom and rear of the printer.

Memory SIMMs

Memory SIMMs increase the graphics storage capacity of the printer, increase the maximum print length, and/or increase through-put by increasing format-while-print abilities. Contact your sales representative to purchase compatible SIMMs in 1, 2, 4, and 8 MB sizes.

76

Zebra XiII Printer User’s Guide