Operation

described below. Pressing the left or right black oval key displays other choices and pressing the Next/Save key selects the displayed choice.

•PERMANENT - permanently saves the changes. Values are stored in the printer even when power is turned off.

•TEMPORARY - saves the changes until changed again or until power is turned off.

•CANCEL - cancels all changes since pressing the Setup/Exit key except the Darkness and Tear-Off settings (if they were changed).

•LOAD DEFAULTS - loads factory defaults. The factory defaults are shown on the following pages.

Note: Loading factory defaults will require Calibration and resetting the Head Resistor value.

•LOAD LAST SAVE - loads values from the last Permanent Save.

Zebra XiII Printer User’s Guide

33