Operation
When the media is in the rest (idle) position, the start of the next label is directly under the printhead. After the label is printed, the media feeds forward until the start of the next label is under the printhead. The media never backfeeds in this mode. The completed labels are rewound onto a core for later use. When the printer completes a batch of labels, printing will stop.
Cutter Mode
(Cutter Option Required)
In this mode, the printer prints the entire label and automatically cuts the label after it is printed. The Cutter Catch Tray “catches” the completed labels.
Operator Controls
This section discusses the functions of the various controls and indicators on the XiII printer. The operator should become familiar with each of these functions.
Power Switch
This switch is located on the back of the printer above the Power Cord and Fuse. The Power Switch should be turned off before connecting or disconnecting any cables.
Turning the switch on activates the printer and causes it to perform a Power- On Self Test as it begins operation. Turning the printer power on while holding down certain front panel keys will launch additional Printer Self Tests following the
External influences such as lightning storms or unwanted noise on the power or data cables may cause erratic printer behavior. Turning the printer’s power off and back on may
Zebra XiII Printer User’s Guide | 25 |