Routine Care and Adjustment
page 17. Brush/vacuum any accumulated paper lint and dust off of the sen- sors.
Cleaning the Cutter Module
(For printers equipped with the optional cutter.)
The Cutter Module requires periodic cleaning to remove paper dust and gummed label residue. The procedure should be performed by the operator as needed to ensure proper cutter action. If labels are not being cut properly, or if the cutter jams with labels, this is an indication that the cutter probably needs cleaning. The cleaning frequency depends on your application and media type.
Clean the stationary cutter blade with cleaning solvent when it becomes gummed up with label adhesive and/or paper debris. If further cutter cleaning is necessary, or if the cutter performs unsatisfactorily, contact a service technician.
Lubrication
CAUTION! No lubricating agents of any kind should be used on this printer! Some commercially available lubricants will damage the finish and the mechanical parts if used.
58 | Zebra XiII Printer User’s Guide |