Go-Video VHS-VHS, 4-Head Hi-Fi manual Remote Control, Copy

— TRK +

—PICTURE +

—SLOW +

AUX

100 POWER

TV VCR

COPY

TV/VCR OSD

VIEW

SELECT

MUTE

MENUCH

CHANGE

LCV

CLEAR

	SKIP		CLK/CTR
INDEX	ZERO	RTN	FF
REC
	REW
			PAUSE
PLAY/ATR
DECK			STOP/EJ
SELECT			■/▲

NOTE:

Some buttons have a dual function. The alternative function is listed above the button.

Remote Control

Before you begin, be sure to put the two supplied AA batteries in the remote.

Your remote control makes it simple to operate and program your Dual-Deck VCR. Take a moment to learn where the buttons are located on the remote control.

POWER Press to turn your Dual-Deck VCR on and off or to set the Auto Power OFF mode.

COPY Press to copy tapes from Deck One to Deck Two.

PLAY/ATR Press to play a tape in the active deck. If you have manually adjusted tracking using the TRACKING keys, press this key for 1.5 seconds to reactivate Automatic Tracking.

INDEX Press to begin an Index Scan or an Index Search. Enter two numeric digits and then press the Fast Forward or Rewind key to initiate the search. In search, the VCR counts to the desired mark and begins play. This can be done either when the deck is playing or is stopped. Press FF or REW without entering digits to initiate a scan. In scan, the VCR stops at each index mark, plays 5 seconds, and moves on. Press while recording to place an Index Mark on the tape. An Index Mark is also automatically placed on a tape every time you begin recording from stop.

LCV Last Channel Viewed. If you have a certain channel you want to come back to easily, enter it using the numerical keys. Then you can flip through other channels using the up and down channel keys and easily return to this channel by pressing the LCV button. This is also the Change button.

SELECT Press to move up and down the items on the menu screen when in On-Screen Programming. This key is also used to move you to the next selection in the Set Date/Time and Timer Record menus. This is also the Mute button.

TV/VCR Press to switch the antenna connection be- tween your VCR and your TV. When in VCR mode, VCR will appear on the Front Panel Display. TV mode is the same as if your VCR were turned off.

MUTE Press to turn off the audio (sound). Press again to turn the audio back on. This will not affect recording. This is also the Select button.

CHAPTER 1 - THE DUAL-DECK SYSTEM 11