NOTE:

Press MENU until you get the desired menu-Deck One or Deck Two.

NOTE:

SP will give you the best quality. However, you must determine whether there is enough time on the tape to record the entire selection. If there is not enough time to record the entire selection in SP, you can set record speed to EP. Be sure to set the correct tape length in this menu.

* NOTE:

If you press MENU and do not get the Features menu, continue pressing MENU until you see the Features menu.

Deck One/Deck Two Menu

Record Speed [Menu, 1]*

1.Press 1 to select this item. Subsequent pressings of this number will cycle this feature between SP and EP.

You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.

2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.

Tape Length [Menu, 2]

It is important to select what length of tape you are using for the Auto speed setting in Timer Record to work. Note your tape box to see what length tape is.

1.Press 2 to select this item. Subsequent pressings of this number will cycle this feature between T120, T160, T180, and T200.

You can also use SELECT (Mute button) to highlight this item and CHANGE (LCV button) to change this feature.

2.When the desired setting is shown on the screen, either press MENU to exit this menu or move to another item.

CHAPTER 3 - PROGRAMMING YOUR DUAL-DECK VCR 39

Page 45
Image 45
Go-Video VHS-VHS, 4-Head Hi-Fi manual Deck One/Deck Two Menu, Record Speed Menu, Tape Length Menu