Graco ti18526c, ti18524d, ti18496b specifications 3A2012J

Operation

13.Turn the main air supply ball valve to the closed position.

FIG. 22

14.Turn the catalyst pump pressure relief/recirculation valve to the pressure relief position. This will relieve any built up pressure.

FIG. 23

15.Verify that the resin pressure relief/recirculation fluid line is routed to a grounded container, then turn the pressure relief/recirculation valve to the pressure relief position.

FIG. 24

16.Units with runaway protection only: disable the prime/flush function by pushing the prime/flush but- ton on the DataTrak.

17.Engage gun trigger lock.

18.If the front end of the gun was removed, apply grease to o-rings and front of gun to prevent mate- rial from curing or sticking to it, then install gun front end.

3A2012J 29