Graco ti18496b, ti18524d, ti18526c specifications Air Motor and Resin Displacement Pump

Air Motor and Resin Displacement Pump

The air motor powers the resin displacement pump which supplies resin to the spray gun.

Air inlet (M): connect air hose to the air inlet.
Fluid filter (N): removes particles from the fluid.
Pressure relief/recirculation valve (P): relieves pres-
sure in the hose and gun.
Pressure relief/recirculation fluid outlet (P1): place
container below fluid outlet or connect fluid hose and
route back to the resin container, or install container	R
below the outlet
Pressurized fluid outlet on filter (R): connect fluid
hose to the 1/4 npt(f) fluid outlet reducer fitting supplied
with Graco hoses.
Fluid inlet (S): connect fluid suction hose to the	P
3/4 npt(m) fluid inlet.
DataTrak (T) (optional): electronic monitoring for mate-	P1
rial tracking, system diagnostics, and pump runaway	N
control. The DataTrak is located on the air control panel.
See the NXT Air Motor manual for details of the Data-	FIG. 2
Trak controls and indicators.

Component Identification

M

ti18499c

S

3A2012J 13