Graco ti18496b, ti18524d, ti18526c specifications Operation

	Operation
5. Engage trigger lock.	8. After the pressure is fully relieved, turn the pressure
	relief/recirculation valve to dispense position.

FIG. 12

FIG. 15

6.Turn catalyst pump pressure relief/recirculation valve to the pressure relief position.

FIG. 13

7.Verify that the resin pressure relief/recirculation fluid line is routed to a grounded container, then turn the pressure relief/recirculation valve to the pressure relief position.

FIG. 14

9.If you suspect the spray tip, hose, or filter is com- pletely clogged or that pressure has not been fully relieved after following the previous steps, very slowly loosen the hose end coupling and relieve pressure gradually; then loosen completely.

10.See the gun manual listed on page 3 for shutdown and maintenance procedures.

11.Perform the scheduled maintenance items listed on page 38.

3A2012J 25