Graco ti18524d, ti18496b, ti18526c specifications Pumpline Technical Data

Technical Data

Pumpline Technical Data

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . .

Maximum air inlet pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Minimum air inlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum ambient air temperature . . . . . . . . . . . . . . . . . . . . . . .

Maximum cycle rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fluid output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum fluid temperature

Stroke length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sound data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13:1 Systems: 1300 psi (9 MPa, 90 bar)

17:1 Systems: 1700 psi (11.9 MPa, 119 bar)

100 psi (0.7 MPa, 7.0 bar)

10 psi (0.07 MPa, 0.7 bar) 120°F (49°C)

70 cpm

See Technical Data in air motor manual 3A2315. 13:1 Systems: 1.5 gpm (free flow at 70 cpm) 17:1 Systems: 1.1 gpm (free flow at 70 cpm)

160°F (71°C)

NOTE: System rating is lower than this due to other, lower-rated components.

2.0 in. (51 mm)

See Technical Data in air motor manual 3A2315. Stainless steel, tungsten carbide with 6% nickel,

UHMWPE, PTFE,

LW100C displacement pump only: Also includes carbon steel

Catalyst Pump Technical Data

Maximum fluid working pressure

Internal catalyst pump version. . . . . . . . . . . . . . . . . . . . . . .

External catalyst pump version . . . . . . . . . . . . . . . . . . . . . .

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wetted parts**. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2000 psi (14.0 MPa,140 bar)

90 psi (0.63 MPa, 6.3 bar)

3.5 lb (1.6 kg)

301, 303, 304, 316, and 17-4 PH grades of stainless steel, silicon nitride, acetal, perfluoroelastomer, PE, PTFE, UHWMPE, polypropylene

**Series A and B systems (built prior to April 2013) have non-metallic nylon catalyst tube fittings. To covert your system to stain- less steel fittings, see the FRP Proportioner manual 332451.

Whip Hose Technical Data

Hose bundles maximum fluid working pressure and wetted materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Catalyst hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 psi (21.0 MPa, 210 bar); PTFE 1/2 in. resin hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000 psi (28.0 MPa, 280 bar); nylon 3/8 in. resin hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3300 psi (23.1 MPa, 231 bar); nylon Solvent/AAC air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 psi (1.6 MPa, 16 bar); nylon 3/8 in. OD air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 psi (0.9 MPa, 9 bar); PET

1/4 in. OD atomizing/AAC air hose . . . . . . . . . . . . . . . . . . . 125 psi (0.9 MPa, 9 bar); PET 1/2 in. OD air hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 psi (1.7 MPa, 17 bar); PET

Resin Pump, Catalyst Pump, Solvent Pump, and Heater Technical Data

See component manuals listed on page 3 for technical data.

84 3A2012J