Grandstream Networks GXV3175 manual HANDSET, Speaker and Headset Mode, Making a Call

usernames and NAT configurations. The registered account will display in the idle screen by default. When the phone is off-hook, users could press Line1/Line 2/Line 3 or the account option in the dial pad shown in Figure 16 to switch between different SIP accounts.

Incoming calls through the three accounts will try to use the corresponding line. If this line is busy, the green icon for the corresponding line will become red. When a call comes in and the line is busy, the next idle line will be used.

HANDSET, SPEAKER AND HEADSET MODE

The GXV3175 allows users to switch from handset to speaker or headset by pressing corresponding icons shown in Dial Pad (Table 6, Item 5). If headset is plugged in, the headset icon will be activated to select.

MAKING A CALL

There are several ways to make a call.

1.By selecting account displayed in idle screen

Users could press the account area displayed in idle screen to make a call via the selected account.

∙In idle screen, select the registered account by touching the marked area in Figure 17.

∙The dial pad will show up with the selected account.

∙Dial the number and press “Audio Call” or ”Video Call” to dial out. Or press “Redial” for the last dialed number.

Figure 17: Making a call by select account displayed in idle screen

Grandstream Networks, Inc.	GXV3175 USER MANUAL	Page 23 of 119
	FIRMWARE VERSION 1.0.0.32	Updated : 12/2010