Changing Setting of Demonstration
This DVD video camera/recorder is equipped with a demonstration function
The default at pumhase time is "Auto'; which will automatically start the demonstration approx three
minutes after the DVD video camera/recorder is turned on
Use the following procedure ifyou wish to view the demonstration immediately or change the setting
to "Off't
1
2
3
Press the MENU button.
Choose "Initial Setup",
"Demo Mode", and
then press tlleI_/||
button.
Press the I_1 or
button to choose tile
desired option, and then press the I_/1|
button.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
can-lera/recorder oil.
Off Toset demonstration tooff
Start: To start demonstration immediately.
Press the MENU button again: Themenu
screen will disappear:
Tostop tiledemonstration midway, press tile
• button.
The demo mode will endwhen tile DVD
video camera/recorder is turned off or the
DISCEJECT hutton is pressed down.
Note:
You can press the DISC NAVIGATION button to stop
demonstration midway: The Disc Navigation screen
wilI appear
• If you choose "Auto", the demonstration wilt not start if
a disc isloaded with the power switch setto "4m'_or
"1_1",or a card isloaded with the power switch set to
• The demonstration function witl not work when the
DVDvideo camera/recorder is connected to PC (for
DZ-GX20A or DZ-MV780A only)
• While the demonstration is being given, the recording
indicator will blink
HITACHI
154