Hitachi DZ-MV780A instruction manual Adjusting Color White Balance

ADJUSTING COLOR (WHITE BALANCE)

This DVD video camera/recorder automatically

adjusts tile color of" subject. Change the white

balance setting depending oil tile recording conditions.

Note:

•The white balance mode can be confirmed using the on-screen information

•The white balance setting will be stored in memory even when the DVD video camera/recorder is turned off

•Do not block the infrared sensor (see "Terminology", p. 155) with hand, etc.

Auto	White balance	always	None
	automatically	adjusted
Set	You can manually adjust
	white balance to match		&hA
	the light source or
	situation (p. 89)
Outdoor	To record in fine		%,_
	weather			Infrared	sensor		block
Indoor I	To record under		• if a tele or wide-conversion lens is used, the auto
	incandescent	light,
			white batance may not operate depending on the
	halogen light or bulb-
			-,8,-	conditions.		If this	happens, set to the mode
	color type fluorescent		recording
			to match the recording conditions, or manualIy set the
	light
			white batance.
Indoor 2	To record under		• Be sure to remove the Iens cap before turning the
			DVD video camera/recorder				on: If the DVD video
	fluorescent light		camera/recorder is turned on with the Iens capped,
A			the white	balance	witl	not work normalty

/Press the MENU button, choose "White Bal." on the "Camera

Functions Setup" menu

screen, and then press the I"/ button.

2 Cboose the desired option, and then press

the I,,/11 button.

ReM_0 MI_

8:00A_

White baIance mode

3 Press the MENU button to end the setting.

88