VIEWING IMAGE ON LCD MONITOR SCREEN

If you open tile LCD monitoi; you can n-lonitor subject in-lageoil the LCD screen.

1 Open tile LCD monitor.

The LCD monitor has a portion where you can hook your finger. Hook tile finger there to open the monitor.

ORange where the LCD monitor can be moved

Tile LCD monitor can be opened up to

approximately 900.

If the LCD

monitor

is open

90 °, it can be tilted

Hook your finger

with the screen down as much as 900, and can

 

also be

tilted with screen up and turned up to

 

180° so

the

screen

f._ces in

tile same direction as

(Bottom)

tile lens.

 

 

 

 

 

If the L CD monitor is turned 1800so the screen

f_ces in tile same direction as the lens during recording, subject image will also appear in tile viewfinder as a mirror image (left/right reversed).

Tilt the LCD monitor to adjust its vertical angle so that you can see tile screen easily.

Note:

If no image appears on LCD monitor screen, refer to "Check T' on page 159

If LCD monitor lights white, refer to page 87.

Be sure to open the LCD monitor approximately 90 o before changing its vertical angle.

Do not record for a prolonged time with the LCD monitor turned approximately 1800 in close contact with the DVD video camera/recorder body: Doing this could cause the DVD video camera/recorder and LCD monitor to become hot

35

Page 35
Image 35
Hitachi DZ-MV780A Viewing Image on LCD Monitor Screen, ORange where the LCD monitor can be moved, Tile lens