Hitachi DZ-MV780A instruction manual Viewing on TV Screen, Perform playback, recording or editing

VIEWING ON TV SCREEN

1Tt..tileTVonn,nd tile,np,selecto,",t

"VCR" whichever applicable Video input.

Re%r to the TV instruction manual fur how to

switch tile TV input.

2 Turn tile DVD video camera/recorder on.

The image that the DVD video camera/

recorder is seeing will appear on the TV

sci'een.

You can also monitor tile image on the LCD

screen or viewfinder of the DVD video

C_t I11 el'a / Fec 0 I'd e I\

3 Perform playback, recording or editing.

You can per%rm playback, editing or editing

on Disc Navigation while checking on TV screen.

Note:

•Adjust the volume of sound on TV

•The infrared remote control is useful when operating the DVD video camera/recorder white viewing an image on TV screen. However, if you use a Hitachi VCR, the remote control may inadvertently operate the VCR if it is near the DVD video camera/recorder.

To prevent this, set the remote control code of the VCR to a position other than "VCR2".

•Information that the DVD video camera/recorder is

recording wiIt appear on the TV screen: You can aIso display onty part of information or switch off the display Refer to "SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)" on page 97, and press the DISPLAY button to switch the display status

•When copy-guarded disc is played back, no image will appear on TV screen.

•If you use TV with wide mode (aspect ratio 16:9) and set the TV to the wide mode, the entire Disc Navigation display may not be displayed on the TV screen If this happens, release the wide mode setting on TV (see the TV instruction manual for releasing the wide mode)

78