Trouble Messages

A message may appear while you are operating the DVD video camera/recorder. If a message appears, refer to the following table and take appropriate corrective action.

Messages are arranged in alphabetical order:

(I)Data error in a part of image file. Repair data now?

(2) Found en-or in image file. Repair data now?

(3) Data error in all image file. Repair all data now?

(t) Disc is not

formatted. If it formats, it becomes possible to use for camera.

(2)However, when you record from PC

connection terminal, _lease do not format.

(3)Format the disc now?

It is possible that the system cannot normally complete writing of file when power is turned off for some reason during recording or editing (deleting, dividing or combining scenes, or creating play list). Selecting "YES" will automatically repair the video file, but even if "NO" is selected, the same message will appear when the

DVD video camera/recorder is turned on next time. (Do not

remove the disc while the DVD video camera/recorder is recognizing it: Ignoring this will deactivate the file repair function.) Follow the instructions on screen, taking note of the following cautions:

Repair will normally be complete in several minutes, but it may take longer (up to one hour).

Be sure to use the AC adapter/charger to power the DVD video

camera/recorder when repairing data: Repair is not possible using a battery. If a battery has been attached, turn the power

switch off once, connect the AC adapter/charger, and then start repairing.

Data may not be repaired, depending on the timing when power was turned off.

Data may not be repaired normally if data recorded on another recorder is mixed in.

The repaired data may be different from the original recorded content because of partial deletion of defective portion.

Since the date/time for repair is added to the repaired data (only the corrected portion for partial repair), the original date/ time information will be lost.

Since all movies, and then all stills, are repaired, the order of recorded contents will be lost in case of message (2) (3) only.

See "1 on page 166.

DVD-R disc that was not initialized for camera use was inserted.

46

Battery is almost empty. Replace it.

Cannot combine scene.

Replace with a charged battery, or use AC adapter/charger to 3ower the DVD video camera/recorder.

Unless consecutive scenes are selected, they cannot be combined.

39, 43

I13

160

Page 160
Image 160
Hitachi DZ-MV780A instruction manual Trouble Messages, 160