Hitachi DZ-MV780A OWhen using brand-new DVD-R disc, Camera/recorder, Once fiormatted a DVD R

Note:

• If the cover of disc insertion btock is open, the

ACCESS/PC indicator will blink when an image is

displayed on the LCD monitor screen: In this case,

the DVD video camera/recorder will not turn off even if

the power switch is set to "OFF"

If the cover remains open after a while, the DVD video

camera/recorder will automatically turn off.

• Disc cannot be inserted or removed unless a charged

battery or AC adapter/charger is connected to the

DVD video camera/recorder.

• If a discharged battery is used, the disc cannot be

inserted or removed: Connect a charged battery or

AC adapter/charger to the DVD video camera/

recorder

• If there is some delay before recording starts, refer to

OWhen using brand-new DVD-R disc

Recognition	of tile disc
will start.	F r_;_Lii	..............................i

The messages on the right

will appear in sequence by

pressing the IP'/ button betx, veen nlessages.

When recording on this DVD video

camera/recorder:

When	final	message		JForr_'Esr	]
"Format	the	disc	now?"
appears,	choose		"YES"

"Check 4" on page 158.

• If the disc is not correctly attached to the turntaNe, it

witl be difficult to close the cover: if this happens, do

not forcibly close the cover (this could cause a fault),

but re-attach the disc to the turntable correctly

• If a single-sided disc is inserted into DVD video

camera/recorder with the printed label facing the

inside, an error message will appear Remove the

disc and reinsert it with its recording side facing the

inside See "Trouble Messages" on page 160.

• When using double-sided disc

Recording is possible on both sides of double-sided

disc However, when recording or playback on one

side is finished, recording or playback will not move

automatically to the other side. Remove the disc once

from the DVD video camera/recorder, turn over the

and then press the I_./n

button. The disc will be

riot'matted.

When fiormatting is

complete, "DVD R disc,

Video mode and 16:9

mode cannot he changed"

will appear (see page 163):

Press the I_/11 hutton to

erase the message.

Once fiormatted_ a DVD R

disc can no longer be

changed to a disc fbr PC, even if it has not been

Not displayed on DZ- MV73OA

II

!_'

disc and insert it again for continued	use
The recording surfaces of double-sided disc are likeIy
to become dirtied or scratched: Always make sure
that there is no dirt or scratch on the	recording
surface facing the pickup tens, and then use the disc
taking great care that it is not dirtied or scratched.
Use the provided disc cleaning cloth	to wipe off any
dirt on disc (see page 26)

recorded on this DVD

video camera/recordei:

Note:

See page 91 for video mode

See page 92 for 16:9 mode

When recording data from PC (for DZ-

GX20A or DZ-MV780A only):

While the above messages are heing displayed, press the • button_ or when message "Format the disc now?" appears, choose "NO" and then press the I_/ hutton.

However, if data fl'om PC has not yet been recorded, the disc can be made usahle on this

DVD video camera/recordei: When inserting the disc into this DVD video camera/recorder,

the same message will appear: If you wish to use it on this DVD video camera/recordei; choose "YES".

Note:

Do not initialize a disc on which you wish to record data

created using the application (DVDfunSTUDIO) of PC.

46