Hitachi DZ-MV780A instruction manual Copy Protected Disc Access Disc Almost Full, II0

Card ful!.

Card full.

Cannot execute.

Card is not formatted. Format the card now?

CHECK DiSC

Control Information Error.

COPY PROTECTED

DISC ACCESS

DISC ALMOST FULL

Disc error has occurred. Finalizing is not complete.

Disc error has occurred. Format the disc now?

Disc error has occurred. Formatting is not complete,

Disc error has occurred. Keep disc inside & restart,

Delete

unnecessary

stills

and

try

the

card,

or use

another

card.

No more recording on this card can be done: Delete unnecessary

29,

II0

stills or use another card.

Delete

unnecessary

stills

and

try

the

card,

or use

another

card.

29,

1I0

Was the card formatted on PC? When using the card on this DVD

I32

video

camera/recorder,

choose

"YES"

and

format

it.

A disc

unusable

on this DVD video

camera/recorder

may

have

been

inserted

or

the

disc

may

be

damaged.

25,

I33

Make sure that the type of disc is correct, and make sure that the

disc is not write-protected.

Mismatch may occur between the recorded image and scene

information.

I34

Update the control

information.

•

Use

another

disc.

•

See

*3 on page

166.

24,

26

The

video

signal input

to this DVD

video

camera/recorder

may be

copy-guarded.

Some

prerecorded video

materials,

such

as

movies,

are

guarded

80

against

copying.

Copy-guarded

materials

cannot

be recorded

on

this

DVD

video

camera/recorder.

The recorded scene is being stored on disc.

Wait

until

the

message

disappears,

and

you

can

start to

use the

49, 51

DVD

video

camera/recorder.

This

DVD

video camera/recorder

is verifying whether the correct

disc

has

been

inserted.

I58

Wait until the message disappears, and you can start to use the

DVD

video

camera/recorder.

Remaining

free

space

on

disc

is less than I

minute

of video or 10

28, II0

3hotos:

Delete

unnecessary

scenes or use another disc.

• Disc error occurred during finalizing, and finalizing failed.

Replace

the

disc.

I35

•See *3 on page 166.

•Has the disc been initialized on PC? Has initializing the disc on PC been interrupted?

Choose

"YES"

and initialize

the

disc when

using it on

this DVD

I32

video

camera/recorder.

Initializing

the

disc

will

erase

all data on

it.

• See *2 on page 166.

The disc may be dirty.

Remove

the

disc

and wipe

off

fingerprints,

dust,

etc. before

reusing

it,

or

use

another

disc.

26, I32

This message may also appear if you insert a disc for which

formatting was interrupted midway, in this case, use another disc.

Disc error could have occurred during editing of scenes.

Turn off

the DVD

video

camera/recorder

with the disc being used

43

in it, connect

AC

adapter/charger,

and then power the DVD video

camera/recorder

again.

Repair

of scenes will be tried.

162