Inserting and Removing

INSERTING DISC

A

/Press down tile DISC EJECT bntton once and release it.

A few moments after the ACCESS/PC indicator blinks, the cover of disc insertion block will open.

2Gently open tile cover by hand f\dly nntil it stops.

3Push the disc against the turntable at the center to lock it until a click is heard.

TurntabIe

_

_

Push the shaded

 

 

portion

Note that the recording surface of disc must face the inside of DVD video camera/recorder

Never touch the disc recording surface or pickup

tens

Disc

A

_1' Push the section marked "PUSH CLOSE" on

the cover of disc insertion block, to close the

covetL

Then the DVD video camera/recorder will

automatically recognize the disc: While the

ACCESS/PC indicator is lit, do not cut off the

power supply, and do not subject the DVD

video camera/recorder to any vibrations or

impact.

Identifying recording sides of disc:

Single sided

disc:

"SIDE

A" mark

The recording

side is

 

 

opposite to the printed labeh

 

 

Double-sided

disc:

 

 

The recording side of "SIDE

 

 

A" is opposite to the "SIDE

 

 

A" marked side.

 

 

The recording side of "SIDE

 

 

B" is the "SIDE A" marked

 

 

side.

The

opposite side is

 

the

"SIDE

A"

 

recording

side.

:iilJ _t

:_ _- Pickup lens

• Use the disc cleaning cIoth provided to wipe off

any dirt adhering to the disc recordingsurface.

Do notuse a dirtiedor scratched disc.

The recording side must face the inside (DVD

video camera/recorder).

45

Page 45
Image 45
Hitachi DZ-MV780A Inserting and Removing, Inserting Disc, Tens, Identifying recording sides of disc, Single sided Disc