Hitachi DZ-MV780A instruction manual Macro Recording, Camera/recorder, Ring

MACRO RECORDING

Use the macro function when recording a small object fl'om close up position: You can shoot the

suhject as close as approximately 13/16" (2 cm) fl'om tile lens surfitce, magnifying the image to fill tile screen.

,4

/Aint the DVD video camera/recorder at the

subject, and press the zoom lever to "W" control side.

Note:

•Zoom can be used, but the subject may not be focused, depending on the distance to the subject In this case, move the zoom to "W" control side to focus

•The amount of light tends to be insufficient during macro recording: If the subject image is too dark, use additional lighting.

RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO EFFECT

Use the tele conversion lens or wide conversion lens with the fbllovving filter diameter and thread

pitch to record subjects for stronger telephoto or wide angle eft)ct:

Filter diameter: 34 mm for DZ GX20A or DZ MV730A: 30.5 mm fbr DZ MV780A

Thread pitch: 0.5 mm

When attaching the optional DZ TL 1 tele conversion lens or DZ WL 1 wide conversion lens, use the optional step tilt ring: DZ SR3437 for DZ GX20A or DZ MV730A, DZ SR3037 fbr DZ MV780A (see page 151).

,4				ol
/ Remove	the lens	hood	fl_om DVD video	*" Remove		the	cap	of conversion	lens,	and screw
camera/recorder,		and	attach the step tip ring	the	lens	into	the	thread of step	tip	ring.
over the lens.
Lens	hood			Conversion	lens
					Step-up		ring

(Remove)(Attach)

•Tele conversion lens: For stronger telephoto effect

•Wide conversion lens: For stronger wide angle effect

Note:

•Be careful not to lose the removed lens hood.

•With DZ-TL1 tele-conversion lens, the focusing range at "T" (telephoto) control side is between approx

16 feet (5 m) and infinite

•When a conversion lens is attached, note that the four corners of screen will be slightly dim if you zoom in on a subject on the W control side (wide-angle side)

•When replacing the lens, take care not to drop the DVD video camera/recorder

•Attaching the conversion lens will disable the function of the built-in flash (for DZ-GX20A onty): Specify 'Flash: Off" (see page 76)

•If a generally available filter is attached, do not attach the removed tens hood.

57