Hitachi DZ-MV780A Disc or Card Management, Initializing Disc or Card Format DISC. Format Card

Disc or Card Management

INITIALIZING DISC OR CARD (FORMAT DISC. FORMAT CARD)

Initializing	DVD RAM disc o1" card will allow you to delete any recorded		contents.
		• Be sure to use the AC adapter/charger to power the DVD video camera/
		recorder for initialization. If the DVD video camera/recorder is turned off
		during initialization and the initialization is interrupted, incorrect
Before	You Begin	initialization wiii result and the incorrectly initialized disc will be
		unusable.

•If you use a brand-new DVD-R disc, message "Disc is not formatted" will appear: Initialize the disc, following the subsequent messages (p. 46).

Press the DISC NAVIGATION button.			Note:
2 Press the MENU button.			• if you wish to delete all recorded contents, it is
			recommended	that you use initialization,		which wilI
3 Use "Operating Menu" (p. 64) to choose			delete aII the	scenes	in much tess time	than	using the
			scene delete	function
			• Initialization will deIete all the recorded contents on
"Format Disc" o1""Format Card" on the
			disc or card: Be careful not to detete data by mistake.
"Disc" o1""Card" menu screen, and then press
			• it may not be possible		to initiaIize a disc	with	many
the )"/	button.		scratches or dirt: Such a disc cannot be used (p 26).
			• This DVD video camera/recorder may not recognize
The screen for verit_fing "Format Disc" or			some discs or cards that have been initialized				on PC
"Format	Card" will	appear.	or a device other than this DVD video camera/
			recorder
4 Choose	"YES", and	then press the I1_/	• if you attempt to initiaIize a disc or card in this DVD
			video camera/recorder when it is connected to PC via
button.
			PC connection cane, the disc or card may not be
Choose "NO" to cancel initialization.			initialized and may be unusable on this DVD video
			camera/recorder (for DZ-GX2OA or DZ-MV780A only)
iFomst Oisc		i

(When using	(When using card)
DVD-RAM disc)

132