Hitachi DZ-MV780A instruction manual 172

The DISC EJECT button is not valid when

the DVD video camera/ recorder is connected to PC.

When the time stamp of file in DVD-RAM is viewed on PC, it is different from the actual recording time,

When DVD- MovieAIbumSE is

started, "Disc in Drive X: cannot be used"

appears,

An image that should have been recorded does not appear when DVD-MovieAlbumSE is started,

While the DVD video camera/recorder is connected to PC, use Explorer to right-click the DVD video camera/recorder drive icon

and execute "Eject".

If DVD-MovieAtbumSE is running, clicking the eject button on DVD-MovieAIbumSE wi!l open the cover of disc insertion block of this DVD video camera/recorder: Remove the disc.

The file system of this DVD video camera/recorder is operated on Greenwich Mean Time (GMT), and time lag information has not been set. With Windows ® as of January, 2005, the time stamp of file viewed on Explorer looks different from the actual recording time, The actual recording time will appear for date/time indication on playback screen,

A disc other than DVD-RAM is loaded in drive: DVD- MovieAIbumSE cannot be used for media other than DVD-RAM

Click the "Preference" button in the dialog box, click the "Device Setting" tab to choose the drive where DVD-RAM disc is loaded

in the "Drive Select" column, and then click "OK",

Click the "Preference" button at top right of DVD-MovieAIbumSE screen, click the "Device Setting" tab to choose the drive where DVD-RAM disc is loaded in the "Drive Select" column, and then click "OK",

No USB HS (high		Make sure that you have already installed the driver provided with
speed) connection	even	the USB2.0 card.
when USB2.0 card is		You will need to install the driver provided by USB2.0 card maker
used,		in order to operate the USS2.0 card at HS (high speed).
Executing "Export"	on	Do not choose "Simple Export": If you do, reading wil! stop
DVD-MovieAtbumSE		midway.
will interrupt reading
midway,

I47

When executing "Export" on DVD- MovieAIbumSE, it wil! take time to read,

"Hardware Removal" results in error,

•If stills are included in the range of "export", it may take more time because data must be re-encoded and read.

•If "Divide by Chapter" is not chosen, it may take some time because data will be read while being re-encoded.

Exit Windows ® once, and then disconnect the DVD video camera/recorder. If your PC uses Windows ® 2000 Professional, the problem may be solved if you install Windows ® 2000 Service Pack 3 or later,

I47

172