USING THE ELECTRONIC IMAGE STABILIZER (EIS)

When you nse zoom (see page 56) to record amagnified snbject image, it will correct f\lzziness in tile
recorded image.
Press the MENU
button, choose "EIS" on
the "Camera Functions
Setup" inellU screen,
and then press tile I_/||
button. I[#_ENTER ]_]RETURN ?;RAM I
h Choose tile "Oil" o1""Off", andthen press tile

I_III button.

3Press the MENU button to end tile setting.

OChecking EIS On or Off

Youcan check EIS On oi"Offby tileon screen
information display.
EIS-- .m_oM,.
OR_I S_0OA_
9,'30'200S
After recording with EIS setto "Off", it is
recommended that you return tile setting to
"On" and then turn tileDVD video camera/
recorder off, unless you normally record with
"Off" setting.
Note;
•The EIS setting wilt be stored inmemory even when
the DVD video camera/recorder is turned off.
• It is recommended that you specify "EIS Off" when
using the DVD video camera/recorder on a desk or
tripod
• When "EIS On" is specified, there will be a slight
difference between the actual movement and the
movement on screen.
• Gross camera shake may not be entirely corrected
even if"EIS On" is specified: Firmly hold the DVD
video camera/recorder with both hands.
• EIS may not operate correctly whenthe tele or wide-
conversion lens isused
• EIS cannot be used when recording photos on DZ-
GX20A or DZ-MV780A.

RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM)

See page 56 for setting on digital zoom.

REDUCING WIND NOISE DURING RECORDING (MIC.FILTER)

When recording sound from tile microphone built into this DVD video camera/recorder, you can
reduce wind noise in recording.
If "MIC.Filter: ON" is specified, tile low fl'equency components in tile sound picked up by
microphone will be cut off during recording: This makes it easier to hear tile target voice or sound
during playback.
A
IPress the MENU
button, choose
"MlC.Filter" on tile
"Camera Functions
Setup" nlenu screen,
and then press tile I_III
button.
/. Choose the desired option, and then press the
I,,/II buttoT1.
3Press the MENU button [ T
to end tile setting. ,V,., 0_g_{00
_Em30Mm
OR_ 8100AM
Note:
• You can also use the on-
screen display to confirm Microphone filter icon
that the MIC Fitter has been
set
• The MIC Filter setting will be stored in memory even
when the DVD video camera/recorder is turned off
• The MIC Fitter function will work only during movie
recording
• The microphone filter function works only with the
built-in microphone: It will notfunction when using an
external microphone (p 75).

9O