When the DVD video camera/recorder is connected to PC:

No drive icon appears

The DVD video camera/recorder is not turned on.

on PC.

Check the power supply.

44

Error occurs in playback of DVD video camera/ recorder on PC.

Turn PC off and then disconnect the PC connection cable. Turn

PC on again, and then use the PC connection cable to connect the DVD video camera/recorder to PC.

Make sure the PC connection cable is completely plugged into this DVD video camera/recorder.

If error occurs with USB connection, the transfer rate is not sufficient. It is recommended that you use a USB terminal conforming to USB2.0 when connecting the DVD video camera/ recorder.

I41

Application is not

Turn the PC and DVD video camera/recorder off, and try again.

normatty run on PC.

 

Error occurs during

The temperature of DVD video camera/recorder is too high due

writing to disc.

to continuous operation.

 

Disconnect the DVD video camera/recorder from PC once,

 

remove the disc from the DVD video camera/recorder, and then

 

turn it off. After a few moments, connect them again and write to

 

a brand-new disc.

Transfer of images

Connect the DVD video camera/recorder to another USB terminal

stops,

of PC. If your PC is a desktop type, it is recommended that you

 

use USB terminal on the back of PC. If you are using USB2.O

 

extended card, it is also recommended that you install the newest

 

version driver provided by each USB2.O card maker.

DVD-RAM/R drive built into PC cannot be used after the provided software has been installed.

DVD-R disc cannot be played back on DVD- MovieAlbumSE.

Error appears when starting DVD- MovieAlbumSE.

Video written to hard disk of PC cannot be edited on DVD- MovieAlbum copy tool.

This problem may be solved if the software related to DVD-RAM/ R/RW of your PC is upgraded, or if the UDF driver is uninstalled. However, with Windows ® Me / 2000 Professional, uninstatling the UDF driver will make it impossible for the JPEG stills recorded on DVD-RAM of this DVD video camera/recorder to be read by the PC.

DVD-MovieAtbumSE does not support playback or data read on DVD-R disc: Use generally available DVD video playback software to play back DVD-R disc on PC.

Make sure that your PC display adapter (video card) conforms to DirectX8.1.

DVD-MovieAtbumSE cannot edit DVD-VR data stored on hard disk of PC: Copy the data to another DVD-RAM disc and then edit it.

I43

I41

I

Movies are

not

Make sure the power switch of this DVD video camera/recorder is

recognized

by

set to "411"or "1_1".

application

in PC.

 

111

Page 171
Image 171
Hitachi DZ-MV780A instruction manual 111, When the DVD video camera/recorder is connected to PC