Hitachi DZ-MV780A instruction manual 163, END of Disc

Disc error.

Disc full. Cannot execute,

Disc has no data.

Disc has no Play List.

Disc includes protected scenes. Delete scenes?

Disc is ful!. Cannot add control info.

Disc is not formatted. Format the disc now?

Drive overheat. Please retry later,

DVD-R Disc, 16:9 mode

cannot be changed when Video mode is

STD.

DVD-R Disc, Input Source cannot be changed.

DVD-R Disc, Video mode and 16:9 mode cannot be changed.

END OF DISC

End scene cannot be divided.

Error occurred. Please replace disc or format disc.

•Use another disc.

•See *3 on page 166.

•Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/ recorder.

Initialize the disc or use another disc.

•Initializing the disc will erase all data on it.

Delete unnecessary scenes before using this disc, or use another disc.

This message will appear when an attempt is made to execute playback or editing on Disc Navigation with no scene recorded.

Switching of play list was selected with no play list stored.

The disc may be software protected from a device other than this

DVD video camera/recorder. To release this case, use a device that has executed software-protect.

The number of entered scenes has reached the limit that can be

entered, so the control information for generating thumbnails cannot be added.

Combine several scenes or delete them.

•Has the disc been initialized on a PC?

Choose "YES" and initialize the disc when using it on this DVD

video camera/recorder. Initialization wil! delete all data on the disc.

• See *2 on page 166.

The temperature inside the DVD video camera/recorder is too high, and reading or writing of the data on disc may not be

performed normally.

Turn the DVD video camera/recorder off and wait for a while. The temperature will be effectively decreased if the DVD video

camera/recorder is placed in a well-ventilated spot.

With DVD-R disc, the setting of I6:9 mode will not be possible when the Video mode is STD.

Once a DVD-R disc has been recorded in the 16:9 mode, the input source will not be changeable.

With DVD-R disc, the movie quality mode and 16:9 mode once used for recording cannot be changed.

The disc is full.

You cannot record on this disc anymore. Prepare another disc or delete unnecessary movie scenes from this disc.

Division is not possible at the end of scene.

•Abnormality has occurred with the DVD-RAM disc to be repaired. Initialize the disc before using it, or use the another disc. Initializing the disc will erase all data on it.

•See *2 on page 166.

24, 26

132

110

125

110, 113

I32

44

93

93

28, 91, 93 /

28

112

132

163