REMOVING DISC

A

/Press down tile DISC EJECT button once and release it.

In a i_lon-lent, the cover of disc insertion block will open.

If tile DVD video

calllera/recorder is oil at this time, the

"EJECT" indicator will blink oil tile LCD monitor or in the viewfinder.

2 Gently open tile cover"

_

_:_

fiflly tmtil it stops.

3 Remove tile disc.

While pushing down tile center portion of

turntable, pick up tile disc, bolding its edge,

to remove it.

Turntable

4Gently push tile section

indicated "PUSH CLOSE" on the covet" of disc

insertion block, to close tile

cover'.

Note:

Do not remove the battery or disconnect the AC adapter/charger during removaI of the disc or untit power is completely turned off: If you do, the disc cover wilt not open. If this happens, reattach the battery or AC adapter/charger, push down the DISC EJECT button once, and then release it

Do not insert anything other than the 8 cm DVD-RAM or DVD-R disc into the disc insertion block: Doing so could cause malfunctions.

When inserting or removing the disc, BE SURE NOT to look into the tens in laser pickup: Doing so could damage your eyesight.

If the battery remaining level runs out, set the power switch to "OFF" to remove the disc (see page 42)

47

Page 47
Image 47
Hitachi DZ-MV780A instruction manual Removing Disc, Gently open tile cover Fiflly tmtil it stops, Remove tile disc