Hitachi DZ-MV780A Inserting Battery Into Remote Control, Removing Battery from Remote Control

INSERTING BATTERY INTO REMOTE CONTROL

Insert the provided lithium battery into remote controh

,4

/While inserting a fine rod into tile bole

marked PUSH, pull tile battery holder out fiJrward.

2 Insert tile lithium battery with tile positive (_)

terminal f_cing down.

3 Slide tbe cox,er to close it.

Note:

The life of lithium battery is approximately one year If the battery is discharged, no operation is possible with remote control: Replace the battery

Battery holder

REMOVING BATTERY FROM REMOTE CONTROL

I Whi,epnshingtile battery holder, slide tile

battery out.

Warning:

•KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.

•IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT

•BATTERY MAY EXPLODE IF NOT HANDLED

PROPERLY. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE

Note:

•Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba CR2032, or Duracell DL2032. Use of another battery may present a risk of fire or explosion

•Dispose of battery safely in accordance with IocaI laws Do not dispose of in fire.

•Do not short circuit the battery.

•Do not hold the battery with the metallic tweezers.

•Keep the battery in a dark, cool, dry place

•The remote control (DZ-RM4W) and lithium battery (CR2032) are supplied only with the DZ-GX2OA and DZ-MV78OA

33