OUsing Remote Control

Point the remote control to tile inf,'areal receiver oil tile DVD video camera/recorcteI_ Tile remote

controllable distance is up to 16 feet (5 m).

\

Infrared receiver

Note:

When using the remote control, make sure that the infrared receiver on DVD video camera/recorder is not

exposed to direct suntight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote control, the DVD video

camera/recorder cannot be operated by remote control.

If there is an obstacle between the remote control and

infrared receiver on DVD video camera/recorder, remote control may not be possible

The DVD video camera/recorder uses the 'VCR2" remote control code of Hitachi VCRs If you use a Hitachi VCR, etc with remote control code set to "VCR2", a VCR placed near the DVD video camera/ recorder will atso be operated by the remote control:

To prevent this, change the remote control code of the

VCR

The remote control (DZ-RM4W) and lithium battery (CR2032) are suppIied only with the DZ-GX20A and DZ-MV780A

34

Page 34
Image 34
Hitachi DZ-MV780A instruction manual OUsing Remote Control, Vcr