PROTECTING DISC FROM WRITING (PROTECT DISC)

You can protect a DVD RAM disc in order to prevent recorded images fl_ombeing erased or edited by mistake. Fnrther recording will not be possible oil protected disc nntil tile protection is released.

1Press the DISC NAVIGATION button.

2 Press the MENU button.

3 Use "Operating Menu"

(p. 64) to choose "Protect Disc" on the

"Disc" 1]lent/ screen,

and then press the I_'/ hutton.

4The screen tbr

ITT_ ÷d Ts_

verif}?ing protection will appear:

Choose "YES", and

then press tile )/11 hntton.

Choose "NO" to

cancel protection. After "YES" o1""NO"

setting, the Disc

Navigation screen will be restored.

Disc protecticon

Note:

To release disc protection, perform the same procedure as above: The screen for vedfying the release of protection will appear

Choose "YES" to release the protection.

If disc protection has been engaged on another device, it may not be releasable on this DVD video camera/recorder: Use the original device that protected the disc to release the protection

VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)

You can find ont how long you will be able to record on one side of disc o1"on card.

1 Press the DISC NAVIGATION button.

2 Press the MENU button.

3 Use "Operating Menu" (p. 64) to choose

"Capacity" on the "Disc" or "Card" menu screen, and then press tile I_/ button.

(When using disc)

(When using card)

4Press tile • bntton to quit.

Tile Disc Navigation screen will be restored.

Note:

With a write-protected disc (see "Terminology", p. 155)

or locked card, the remaining space will always be displayed as "O"

"1 With DVD-R disc: The quality mode first used for recording with disc will appear.

*2With DVD-R disc: This will not be displayed.

133

Page 133
Image 133
Hitachi DZ-MV780A Protecting Disc from Writing Protect Disc, Verifying Remaining Free Space on Disc or Card Capacity, 133