Ring Imager Setting 4400 | Default |
| |
Set All Defaults/Cancel Bar Codes (page 5-5) | All Defaults |
| |
Enable / Disable Parameter Scanning (page 5-6) | Enable |
| |
Imager Parameters - General | |
| |
Decode Session Timeout (page 5-6) | 9.9 sec |
| |
Decode Aiming Pattern (page 5-7) | Enable |
| |
Decoding Autoexposure (page 5-7) | Enable |
| |
Decoding Illumination (page 5-8) | Enable |
| |
Focus Mode (page 5-9) | Far Focus |
| |
LED Illumination (page 5-10)(LED Illumination PL4407) | Internal LED Illumination |
| |
LED Illumination (page 5-10)(LED Illumination MS4407) | External LED Illumination |
| |
Operational Mode (page 5-11) | Decode Mode |
| |
Power Mode (page 5-12)(Power Mode PL4407) | Low Power |
| |
Power Mode (page 5-12)(Power Mode MS4407) | Continuous On |
| |
Presentation Mode Session Timeout (page 5-12) | 2 sec |
| |
Time Delay to Low Power Mode (page 5-13) | 1 sec |
| |
Time-out between Decodes, Same Symbol (page 5-14) | 0.6 sec |
| |
Trigger Modes (page 5-15)Trigger Mode PL4407) | Level |
| |
Trigger Modes (page 5-15)(Trigger Mode MS4407) | Presentation Mode |
| |
Report Version (page 5-16) | Current Software Version |
| |
Transmit Code ID Character (page 5-16) | None |
| |
Prefix / Suffix Values (page 5-22) | Prefix: Null, Suffix 1 : LF, Suffix 2: CR |
| |
Scan Data Transmission Format (page 5-23) | Data As Is |
| |
Transmit “No Read” Message (page 5-25) | Disable |
| |
Simple Serial Interface (SSI) Options | Not Supported |
| |
Event Reporting | Not Supported |
| |
Serial Host Parameters | Not Supported |
| |
Beep After Good Decode | Not Supported |
| |
Beeper Tone | Not Supported |
| |
Beeper Volume | Not Supported |
| |
FN1 Substitution Values | Not Supported |
| |
Prefix / Suffix Values | Not Supported |
| |
Symbologies | |
| |
UPC/EAN | |
| |
UPC-A(page 5-26) | Enable |
| |
UPC-E(page 5-26) | Enable |
| |
UPC-E1(page 5-27) | Disable |
| |
EAN-8/JAN-8(page 5-27) | Enable |
| |
EAN-13/JAN-13(page 5-28) | Enable |
| |
Bookland EAN (page 5-28) | Disable |
| |
Bookland Format (page 5-29) | Bookland 10 |
| |
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) (page 5-29) | Ignore Supplementals |
| |
UPC/EAN/JAN Supplemental Redundancy (page 5-31) | 10 |
| |
Transmit UPC-A Check Digit (page 5-31) | Enable |
| |
