Ring Imager Setting 4400

Default

 

 

Intercharacter Gap Size (page 5-80)

Normal

 

 

Macro PDF

Not Supported

 

 

Macro PDF Transmit/Decode Mode Symbols

Not Supported

 

 

Transmit Macro PDF Control Header

Not Supported

 

 

Escape Characters

Not Supported

 

 

Flush Macro PDF Buffer

Not Supported

 

 

Abort Macro PDF Entry

Not Supported

 

 

Redundancy Level (page 5-77)

Level 1

 

 

Security Level (page 5-79)

Level 1

 

 

Intercharacter Gap Size (page 5-80)

Normal

 

 

Set All Defaults/Cancel Bar Codes

Use the Set All Defaults bar code to return all parameters to their default values. Scanning this bar code does not affect the mobile device’s operating system, wireless client or installed software (e.g., AppLock) settings.

When the Parameter Scanning parameter is disabled, the scan engine can still scan the Set All Defaults bar code. Default value of Parameter Scanning is Enable.

When parameters are changed, the new value replaces the standard default value in memory.

Set All Defaults

Cancel

See Pre-Configured Defaults (page 5-1) for an alphabetical listing of all default values.

See Also: Reset (page 2-10)

5 - 5