UPC/EAN/JAN Supplemental Redundancy

Default: 10 Times

With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a symbol without supplementals is decoded before transmission. The range is from 2 to 30 times. Five or above is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals, and the autodiscriminate option is selected.

To begin setting the decode redundancy value, scan this bar code:

Next, scan two numeric bar codes that correspond to the desired value using the Imager Keypad Number Symbols (page 5-81). Single digit numbers must have a leading zero.

To correct an error or change a selection, scan Cancel on the Imager Keypad Number Symbols page.

Transmit UPC-A Check Digit

This parameter determines whether the symbol will be transmitted with or without the UPC-A check digit.

Select an option by scanning either of the bar codes shown below.

* Enable Transmit UPC-A Check Digit

Disable Transmit UPC-A Check Digit

5 - 31