Trigger Mode

Note: The Bluetooth Ring Scanner Module with a ring scanner is designed to be operated in Host Trigger Mode. For best results leave the Trigger Mode default value unchanged for these devices.

Use this parameter to determine when the laser is activated and decoding begins, how long the laser remains on and what determines the cessation of the laser scan and decode process.

Trigger Mode

Function

 

 

Level

A trigger pull or Scan button press activates the laser and decode processing. The laser

 

remains on and decode processing continues until a trigger release, a valid decode or the

 

Laser On Time-out is reached.

 

 

Pulse

A trigger pull or Scan button press activates the laser and decode processing. The laser

 

remains on and decode processing continues until a valid decode, or the Laser On Time-out

 

is reached.

 

 

Continuous

The laser is always on and decoding. See Also: Time-out Between Decodes, Same Symbol

 

(page 4-23)

 

 

Blinking

This trigger mode is used for triggerless scanning operations. Scanning range is reduced in

 

this mode. This mode cannot be used with scanners that support an aim mode.

 

 

Host (default)

Triggering signal comes from a host command. Any actual trigger pull or Scan button press

 

will be interpreted by the scanner engine as a Level triggering option.

 

 

Select a trigger mode by scanning the appropriate bar code. If you wish to change your selection, scan Cancel.

Level

Pulse

Continuous

4 - 25