Transmit “No Read / Decode” Message
Use this parameter to decide whether a message is sent to the host when a bar code symbol does not decode.
When enabled, and a symbol does not decode within either:
•A scan button press activates the laser and decode processing, the processing continues until a scan button release, or
•The laser decode processing continues until the Laser On Timeout is reached.
•A “NR” (No Read) is transmitted to the host. Any prefix or suffixes which have been enabled are appended around this message.
When disabled, and a symbol does not decode, no message is sent to the host.
Select an option by scanning either of the bar codes shown below.
Enable No Read
* Disable No Read
4 - 24