Next, scan four numeric bar codes that correspond to the computer keycode using the Keypad Number Symbols (page 4-72).

If you wish to change your selection, scan Cancel on the Keypad Number Symbols page.

Suffix 2

To begin setting Suffix 2 value, scan this bar code:

Next, scan four numeric bar codes that correspond to the computer keycode using the Keypad Number Symbols (page 4-72).

If you wish to change your numeric selection, scan Cancel on the Keypad Number Symbols page.

Scan Data Transmission Format

Note: Parameter Prefix and Suffix (page 4-8)should be set after setting this parameter.

Use this option when you want to append a prefix and suffix to the decode data.

Set this parameter by scanning one of the following bar codes.

* Data As Is

[Data] [Suffix 1]

[Data] [Suffix 2]

4 - 9