Bookland Format
This parameter is used to control the Bookland Format. Select an option by scanning either of the bar codes shown below.
* Bookland 10
Bookland 13
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are available:
Selecting:
Option | Result |
|
|
Decode UPC/EAN/JAN with | UPC/EAN/JAN symbols without supplemental characters are not decoded. |
Supplementals |
|
|
|
Ignore Supplementals | The UPC/EAN/JAN symbol is decoded and the supplemental bar code is |
| ignored. |
|
|
Autodiscriminate UPC/EAN/JAN | When this option is selected you must assign a value to the “Decode UPC/ |
Supplementals | EAN Supplemental Redundancy” parameter. A value of 5 or more is |
| recommended. |
|
|
Enable 378/379 Supplemental Mode | The scanner will identify supplementals for |
| start with a 378 or 379 prefix only. All other UPC/EAN/JAN codes are |
| decoded immediately and the supplemental characters ignored. |
|
|
Enable 978 Supplemental Mode | The scanner will identify supplementals for |
| start with a 978 prefix only. All other UPC/EAN/JAN codes are decoded |
| immediately and the supplemental characters ignored. |
|
|
Enable Smart Supplemental Mode | The scanner will identify supplementals for |
| start with a 378, 379 or 978 prefix only. All other UPC/EAN/JAN bar codes |
| are decoded immediately and the supplemental characters ignored. |
|
|
Note: In order to minimize the risk of invalid data transmission, select whether to read or ignore supplemental characters.
Note: Select an option by scanning one of the bar codes shown below. If you wish to change your selection, scan the Cancel bar code and scan again.
5 - 29