Charging Pocket

Battery charger

1.Battery Pocket

2.Battery Charging Contacts

There are very small battery retaining mechanisms in the battery pockets.

Footprint and Mounting Hole Location

Installation

Assemble the Power Supply

Assemble the AC adapter for the Bluetooth Ring Scanner Module (BTRS) battery charger before connecting it to the battery charger.

The AC power supply for the battery charger is shipped with the battery charger. For non-US models a power cord is required.

1.Plug the 2-prong cable into an AC wall outlet.

2.Firmly press the female end of the power cable into the male connector on the AC power adapter.

3.AC power is now being applied to the power adapter.

Setup

Prerequisite: The AC Adapter is assembled and receiving AC power.

Do not insert battery packs until the battery charger has finished powering up:

8 - 4