Convert I 2 of 5 to EAN 13

A successful bar code conversion requires the following to be true:

Interleaved 2 of 5 scanning is enabled.

•One of the I 2 of 5 lengths is set to 14.

•The bar code has a leading zero.

•The bar code has a valid EAN-13 check digit.

When enabled, the parameter converts a 14 character I 2 of 5 bar code into EAN-13 and transmits it to the host as EAN-13.

Set this parameter by scanning either of the bar codes shown below.

Enable Convert I 2 of 5 to EAN-13

* Disable Convert I 2 of 5 to EAN-13

Discrete 2 of 5 (DTF)

When enabled, Discrete 2 of 5 (D 2 of 5) symbols will be scanned, decoded and transmitted.

Set this parameter by scanning either of the bar codes shown below.

Enable Discrete 2 of 5

* Disable Discrete 2 of 5

5 - 53