![](/images/new-backgrounds/1308404/308404273x1.webp)
HP LaserJet 1320nw printer
Power requirements (110)
Power requirements (220)
Power consumption
Minimum recommended circuit capacity for typical product
●During printing (22 ppm): 345 watts (average)
●During Ready (Standby) and PowerSave*: 6 Watts
*Instant on fuser technology
●Off: <1 watts
●4.5 amps at 115 volts
●2.6 amps at 230 volts
Note
Note
Note
Note
Values are current as of April 1, 2004. Values are subject to change without notice. See http://www.hp.com/support/lj1160/ or http://www.hp.com/support/lj1320/ for current information.
The power reported is the highest value measured for monochrome printing using all standard voltages.
The default time from Ready mode to PowerSave mode and the recovery time from PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the instant on fusing.
The heat dissipation in Ready mode is 20 BTU/hour.
ENWW | Electrical specifications 127 |