Misformed characters
● If characters are improperly formed, producing hollow images, the media stock might be too slick. Try a different media. See Printer media specifications for more information.
● If characters are improperly formed, producing a wavy effect, the printer might need service. Print a configuration page. If the characters are improperly formed, contact an
Page skew
● Make sure that the media is loaded correctly and the media guides are not too tight or too loose against the media stack. See Loading media into the input trays for more information.
● The input bin might be too full. See Loading media into the input trays for more information.
● Check the media type and quality. See Printer media specifications for more information.
Curl or wave
● Check the media type and quality. Both high temperature and humidity cause media to curl. See Printer media specifications for more information.
● The media might have been in the input tray too long. Turn over the stack of media in the tray. Also, try rotating the media 180° in the input tray.
● Open the
● The fuser temperature might be too high. In your printer driver, make sure the appropriate media type is selected. If the problem persists, select a media type that uses a lower fuser temperature, such as transparencies or light media.
106 Chapter 6 Problemsolving | ENWW |
