Note
Note
Note
4.Select the port that the printer is connected to, and click Next.
5.Click Have Disk. Click Browse.
6.On the
a.Select your language from the directory list, and
b.Select drivers from the directory list, and
c.Select your operating system from the directory list, and
d.Select the driver from the directory list, and
e.Click OK to select the INF file.
f.Click HP LaserJet 1160 or HP LaserJet 1320 series printer, and click OK to begin the installation.
7.Follow the
To install printer software for Windows XP
See the operating system documentation for instructions on installing a printer driver.
To install printer software for all other operating systems
Insert the software CD that came with the printer into the computer
If the Welcome screen does not open, click Start on the Windows task bar, click Run, type Z:\setup (where Z is your CD drive letter), and click OK.
Printer Properties (driver)
Printer Properties control the printer. You can change the default settings, such as media size and type, printing multiple pages on a single sheet of media
●Through the software application that you are using to print. This only changes the settings for the current software application.
●Through the Windows operating system. This changes the default settings for all future print jobs.
Because many software applications use a different method of accessing the printer Properties, the following section describes the most common methods used in Windows 98, 2000, Me, and Windows XP.
To only change the settings for the current software application
Although the steps can vary between software applications, this is the most common method.
1.From the File menu in the software application, click Print.
2.On the Print dialog, click Properties.
3.Change the settings, and click OK.
12 Chapter 1 Printer basics | ENWW |
