4 Load originals and load paper

This chapter provides instructions for loading originals on the glass to copy or scan, choosing the best paper type for your job, loading paper in the paper tray, and avoiding paper jams.

Load an original

You can copy or scan up to letter- or A4-size originals by loading them on the glass, as described here.

Note Many of the special features will not work correctly if the glass and lid backing are not clean. For more information, see Clean the HP All-in-One.

To load an original on the glass

1.Lift the lid and place your original face down on the right front corner of the glass.

Tip For more help on loading an original, refer to the guide engraved under the glass.

2.Close the lid.

Tip You can copy or scan oversized originals by completely removing the lid from your HP All-in-One. To remove the lid, lift the lid part way and push out either at the left or right side to release the lid hook from its latch, then gently slide the remaining hook from its latch.

paper load and originals Load

User Guide

13